parks planer for sale sorted by

relevance

Does the table raise and lower without great effort? However, based on a limited number of planers surveyed to date it appears that the steel pointers were used on early machines, to approximately serial number 6600.

It can mean anything from a paint job to a complete rehabilitation with new bearings and every part dis-assembled, cleaned and polished.

com - All rights reserved.

Original Table Roll Bearings Later Table Roll Bearings with Bronze Sleeves There are at least two variations of the depth of cut pointer — a bent steel wire or rod version and a bent flat aluminum version.

We know that the gearbox itself was originally cast iron, but at some point fairly early in its history approximately at serial number 5900 it was changed to cast aluminum, probably because the weight of the CI gearbox caused excessive wear of the gearbox where it hangs off the cutter head shaft.

Look for broken gears or a broken or missing chain.

Original Version of Table Second Version of Table The earliest planer I have documented had a dust hood that bolted on and was not hinged.

37, which we think was published on or about 1937.

I note those items because changes soon appeared regarding them.

Parks Enterprises makes what we believe to be the best boards on the market.